Fix Measured Fill Issue on KitchenAid Fridge KFIS27CXBL2

Kitchen Appliances

If your Measured Fill feature on your KitchenAid Whirlpool KFIS27CXBL2 fridge has stopped working, it can be frustrating, especially when it dispenses incorrect amounts of water. Follow the troubleshooting steps below to resolve the issue and recalibrate the system.

Causes of Measured Fill Malfunction

Calibration Issue: The measured fill feature might be out of calibration, causing it to dispense incorrect amounts.
Clogged Water Line: A clogged or restricted water line can affect the water flow, leading to incorrect measurements.
Faulty Sensors: Malfunctioning sensors or electronic components can disrupt the measured fill functionality.

Steps to Fix Measured Fill Issue on KitchenAid Fridge

1. Recalibrate the Measured Fill Feature

To recalibrate the system, follow the instructions in the user manual for recalibrating the measured fill feature.
Typically, this involves holding down the measured fill button for several seconds until the fridge enters calibration mode.
Follow on-screen prompts or refer to the manual to complete the calibration process.

2. Check for Water Line Clogs

Inspect the water line to ensure there are no kinks or blockages causing low water pressure.
Disconnect the fridge from the power source and water supply, then check for any obstructions in the water line.
If necessary, replace the water filter or clear any visible clogs.

3. Inspect the Sensors and Electronic Components

If recalibration and water line checks don’t resolve the issue, inspect the fridge’s sensors and electronic components.
Check the fridge’s control board and sensors for any signs of damage or malfunction.
If the sensors or control board are faulty, you may need to replace the parts or contact KitchenAid support for further assistance.

4. Reset the Fridge

Sometimes, a simple reset can fix minor issues with the appliance.
Turn off the fridge for a few minutes, then power it back on and check if the measured fill works correctly.

Conclusion

By following these steps, you should be able to fix the Measured Fill issue on your KitchenAid Whirlpool fridge KFIS27CXBL2. Recalibrating the system, checking for clogs, and inspecting the sensors are the most common fixes for this issue.

For more “Kitchen Appliances” solutions, please check our Kitchen Appliances.